Re: Possible sane problem with version 1.0.2 or system

From: Oliver Rauch (oliver.rauch@Wolfsburg.DE)
Date: Fri Jul 14 2000 - 16:00:24 PDT

  • Next message: Russ Burdick: "Re: 2 scanners on startup--have only one"

    "Ralph F. De Witt" wrote:

    > Hi Oliver:
    >
    > Checked the data cable to ensure it is connnected w/terminating resistor and
    > connected on both ends, ensured the was permanently on before booting Linux.
    >
    > Ran cat /proc/scsi/scsi as both root and user and came up with
    > Attached Devices: none both times.

    Ok, then you should start with the scsi-adapter driver.
    Read relevant files to your scsi controller in /usr/src/linux/drivers/scsi/
    As lon as the /proc/scsi/scsi does not list the scanner sane does not
    have any chance to talk to the scanner.

    Did you test it with windows?

    Bye
    Oliver 

    --
Homepage:       http://www.wolfsburg.de/~rauch
sane-umax:      http://www.wolfsburg.de/~rauch/sane/sane-umax.html
xsane:          http://www.wolfsburg.de/~rauch/sane/sane-xsane.html
E-Mail:         mailto:Oliver.Rauch@Wolfsburg.DE

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Fri Jul 14 2000 - 16:09:03 PDT