Re: can't recognize UMAX-VistaS6 on AHA1520b

From: Oliver Rauch (oliver.rauch@Wolfsburg.DE)
Date: Sun Jul 02 2000 - 14:40:57 PDT

  • Next message: Oliver Rauch: "Re: scsi command queuing"

    Didier Galland wrote:

    > Hello,
    > My Mandrake 7.02 can't recognize my Umax Vista-S6 scanner wich is hosted by
    > a Adaptec aha1520b scsi card. This card works well and is recognized trough
    > its bios (My CD-burner is found)
    > - sg driver (generic scsi driver) is installed V.2136
    > - My scanner is in ready mode when the sytem boots
    > - scsi chain : terminator (by scsi card' bios) -cd-burner - computer -
    > scanner terminator (by scsi card's bios)
    >
    >

    The terminator if the scsi card has to be turned off and the scanner needs a terminator!

    Or you reorder the chain:

    Terminator-Scanner-CDBurner-SCSIController(Terminated)

    Bye
    Oliver 

    --
Homepage:       http://www.wolfsburg.de/~rauch
sane-umax:      http://www.wolfsburg.de/~rauch/sane/sane-umax.html
xsane:          http://www.wolfsburg.de/~rauch/sane/sane-xsane.html
E-Mail:         mailto:Oliver.Rauch@Wolfsburg.DE

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Sun Jul 02 2000 - 14:27:34 PDT