"Robert A. Morris" wrote:
> Hi,
>
> I recently upgraded to RedHat 6.2 and SANE 1.0.2. I have a ScanMaker X6 EL
> attached to an Adaptec AVA-2906 PCI SCSI card which is not sharing interrupts.
> I also have a Yamaha CRW4416S CD-RW drive and an Iomega Zip 100 SCSI Insider
> drive attached to the SCSI card. Both of the drives work fine, and the whole
> configuration worked great before I upgraded.
>
> Now when I try to run any flavor of scanimage (scanimage, xscanimage, xsane),
> as follows:
>
> [/]# scanimage
> [/]# xscanimage &
> [/]# xsane &
>
> The program seems to hang after doing some basic initialization. If I add a
> device name (there is no device named /dev/scanner, I just use /dev/sga):
>
> [/]# scanimage microtek2:/dev/sga
> [/]# xscanimage microtek2:/dev/sga &
>
> The above programs seem to work fine, but XSANE:
>
> [/]# xsane microtek2:/dev/sga &
>
> hangs the same as before. Note that only the program hangs in each case, not
> the system. I'm OK with using XScanimage, but I'd really rather use XSANE.
> What can I do?
>
edit /usr/local/etc/sane.d/dll.conf
and set a comment (#) before all backends that you do not need
Bye
Oliver
-- Homepage: http://www.wolfsburg.de/~rauch sane-umax: http://www.wolfsburg.de/~rauch/sane/sane-umax.html xsane: http://www.wolfsburg.de/~rauch/sane/sane-xsane.html E-Mail: mailto:Oliver.Rauch@Wolfsburg.DE-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Sat Apr 08 2000 - 01:52:07 PDT