Re: HP4C + Symbios SCSI card

• Previous message: Douglas Gilbert: "Re: HP4C + Symbios SCSI card"
• In reply to: Anne Merritt: "HP4C + Symbios SCSI card"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Anne Merritt wrote:

> Hi!
>
> I have an HP Scanjet 4C with a Symbios SCSI card that
> won't find the scanner on Linux. I built a new kernel
> with the Symbios and NCR drivers enabled, but I can't
> move past that.
>
> Here are the boot messages:
>
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> NCR53c406a: no available ports found
> sym53c416.c: Version 1.0.0
> scsi : 0 hosts.
> scsi : detected total.
> PPP: version 2.3.7 (demand dialling)
>
> I don't use any kernel arguments in Lilo, but I couldn't
> find anywhere that could tell me what the magic words
> are if there are any. Does anyone know?
>

Are you sure you have the right scsi driver?

Which number is printed on the scsi card, there is a different
driver for the 53c8xx cards!

Bye
Oliver

--
Homepage:       http://www.wolfsburg.de/~rauch
sane-umax:      http://www.wolfsburg.de/~rauch/sane/sane-umax.html
xsane:          http://www.wolfsburg.de/~rauch/sane/sane-xsane.html
E-Mail:         mailto:Oliver.Rauch@Wolfsburg.DE
--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

• Next message: Wolfgang Rapp: "Re: sane-1.0.2 libsane.so broken in Solaris 7"
• Previous message: Douglas Gilbert: "Re: HP4C + Symbios SCSI card"
• In reply to: Anne Merritt: "HP4C + Symbios SCSI card"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sat Mar 11 2000 - 03:14:15 PST