Re: Xsane-0.55: scan resolution selection (Epson 1200S, CVS Sane)

From: Karl Heinz Kremer (khk@khk.net)
Date: Mon Feb 21 2000 - 11:37:10 PST

  • Next message: Matto Marjanovic: "Re: support for AGFA ARCUS II"

    On Sun, Feb 20, 2000 at 09:46:17PM +0000, Dave Hill wrote:
    > Karl Heinz Kremer wrote:
    > >
    > > No need no apologize... Thanks for the explanation, but it came
    > > a bit too late :-) I have tried this and since yesterday it's in
    > > the repository. XSane does display the complete list (32 values)
    > > an it starts with 50 dpi (it does however set the preview resolution
    > > for a full page scan to 60 dpi).
    > >
    >
    > I realised afterwards that the "20 items and > 50" only applied
    > if xsane made up the list.
    >
    > Yes, it works, but disables the slider entirely in xsane and
    > xscanimage. Looks like you can't have the best of both worlds
    > (a list of resolutions that match the ones the scanner likes
    > or the ability to choose any resolution from the slider).

    I guess the slider issue could be changed in xsane. The old way this
    was handled in the Epson backend for the preview resolution used a
    slider and displayed only the "real" resolutions. Oliver is not
    using the SANE slider for the resolution setting, he is doing something
    special so that he can hide or display it at will. I assume that it
    shluld be possible to emulate the resolution selection via slider
    even if the scanner reports a list.

    Karl Heinz

    -- 
    Karl Heinz Kremer                                      khk@khk.net
                                                    http://www.khk.net
    


    --
    Source code, list archive, and docs: http://www.mostang.com/sane/
    To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    



    This archive was generated by hypermail 2b29 : Mon Feb 21 2000 - 11:36:28 PST