I have measured the cable lenght again and it is precisly 2 m.
Sorry that I didnt write the correct lenght at the first time.
I hope it is no problem nevertheless.?
mox
>
> The cable length is fine (as long as the cable is OK).
>
> Karl Heinz
>
> On Mon, Jan 03, 2000 at 02:06:28PM +0100, Markus Klein wrote:
> > OK. I´ll try other ID´s. And no, nothing else is connected to the
SCSI adapter.
> > There is only this card (with nothing connected to the internal
port) and an
> > approximatly 1. - 1.5 m cable from the external port to the "input"
port of the
> > scanner and an active termination at the other port of the scanner.
> > Could the length of the cable be a problem? (Otherwise the original
Mustek
> > cable is about the same lenght.)
> > thnx
> > mox
> --
> Karl Heinz Kremer khk@khk.net
> http://www.khk.net
> ICQ: 41190739
>
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Sat Jan 08 2000 - 17:52:23 PST