i have problems to run my snapscan300 at an aha1502-adapter under linux
everything seems ok, i did the following
1)
during booting
<4>aha152x: processing commandline: ok
<4>aha152x: BIOS test: passed, detected 1 controller(s)
<4>aha152x0: vital data: PORTBASE=0x140, IRQ=10, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
<4>aha152x: trying software interrupt, ok.
<4>scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
<4>scsi : 1 host.
<4> Vendor: AGFA Model: SnapScan Rev: 1.40
<4> Type: Scanner ANSI SCSI revision: 02
<4>Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
<4>scsi : detected total.
2)
>cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: AGFA Model: SnapScan Rev: 1.40
Type: Scanner ANSI SCSI revision: 02
3)
>find-scanner
find-scanner: found scanner "AGFA SnapScan 1.40" at device /dev/scanner
find-scanner: found scanner "AGFA SnapScan 1.40" at device /dev/sg0
find-scanner: found scanner "AGFA SnapScan 1.40" at device /dev/sga
4)
> ls -l /dev/sga /dev/sg0 /dev/scanner
lrwxrwxrwx 1 root root 3 Nov 27 22:38 /dev/scanner -> sg0
crw-rw---- 1 root scanner 21, 0 Apr 5 1999 /dev/sg0
lrwxrwxrwx 1 root scanner 3 May 5 1999 /dev/sga -> sg0
5)
> sgcheck
Assignment of generic SCSI devices,
device host/channel/ID/LUN type(numeric type) vendor model:
/dev/sg0 0/0/2/0 Scanner AGFA SnapScan
6)
> scanimage snapscan:/dev/scanner
scanimage: no SANE devices found
:i ignored the pnm's in dll.conf, snapscan is available
everything looks great, but nothing does work, its grazy, please give me a hint
vale, tom
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com