Wim Taymans wrote:
>
<snip>
> More strangeness: If I do saned -d, it works (just once though)...
>
> I was just thinking, is this due to the text appearing at startup.
> somehow
> saned started from inetd seems to also send this to the client, where
> with saned -d
> you only get to see the result of the probe, while the text is on the
> console where I started saned -d.
OK, I start saned -d on the console.
I do (from the other host): scanimage -L
reply:
[sanei_init_debug]: Setting debug level of net to 128.
[net] adding backend fireburner
device `net:fireburner:microtek2:/dev/sga' is a Microtek ScanMaker X6 /
Phantom 636 flatbed scanner
[net] exiting
[net] closing dev 0x8058190, ctl=24
All ok, in the console where I start saned -d is the text output of the
probe:
Scanner attributes from device structure
========================================
Scanner ID...
~~~~~~~~~~~~~
Vendor Name: ' '
Model Name: 'Scanner 636A4 '
Revision: '1.40'
Model Code: 0x91 (X6)
Device Type Code: 0x06 (Scanner),
Scanner type: Flatbed scanner
....
Then I start saned -d 128 on the console
again scanimage -L and voila:
[sanei_init_debug]: Setting debug level of net to 128.
[net] adding backend fireburner
[net] get_devices: ignoring rpc-returned status Unknown SANE status code
168448867
[net] exiting
[net] closing dev 0x8058190, ctl=24
No debug output on the server console (and saned doesn't stop either).
I bet it's the debugging text sent to the client...
Regards,
Wim
>
>
>>
>> CU, Andy
>
> Wim
>
>>
>>
>> --
>> = Andreas Beck | Email :
>> <andreas.beck@ggi-project.org> =
>>
>> --
>> Source code, list archive, and docs: http://www.mostang.com/sane/
>> To unsubscribe: echo unsubscribe sane-devel | mail
>> majordomo@mostang.com
>
> --
> "What people have been reduced to are mere 3-D representations of their own
> data."
> -- Arthur Miller
>
>
--
Nothing is illegal if one hundred businessmen decide to do it.
-- Andrew Young
--------------E4B0C0D661F158E94844CB79
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
Wim Taymans wrote:
<snip>
More strangeness: If I do saned -d, it works (just
once though)...
I was just thinking, is this due to the text appearing at startup. somehow
saned started from inetd seems to also send this to the client, where
with saned -d
you only get to see the result of the probe, while the text is on the
console where I started saned -d.
OK, I start saned -d on the console.
I do (from the other host): scanimage -L
reply:
[sanei_init_debug]: Setting debug level of net to 128.
[net] adding backend fireburner
device `net:fireburner:microtek2:/dev/sga' is a Microtek ScanMaker
X6 / Phantom 636 flatbed scanner
[net] exiting
[net] closing dev 0x8058190, ctl=24
All ok, in the console where I start saned -d is the text output of
the probe:
Scanner attributes from device structure
========================================
Scanner ID...
~~~~~~~~~~~~~
Vendor Name: '
'
Model Name:
'Scanner 636A4 '
Revision:
'1.40'
Model Code:
0x91 (X6)
Device Type Code: 0x06 (Scanner),
Scanner type: Flatbed scanner
....
Then I start saned -d 128 on the console
again scanimage -L and voila:
[sanei_init_debug]: Setting debug level of net to 128.
[net] adding backend fireburner
[net] get_devices: ignoring rpc-returned status Unknown SANE status
code 168448867
[net] exiting
[net] closing dev 0x8058190, ctl=24
No debug output on the server console (and saned doesn't stop either).
I bet it's the debugging text sent to the client...
Regards,
Wim
CU, Andy
Wim
--
= Andreas Beck
| Email : <andreas.beck@ggi-project.org> =
--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
--
"What people have been reduced to are mere 3-D representations of their own
data."
-- Arthur Miller
--
Nothing is illegal if one hundred businessmen decide to do it.
-- Andrew Young
--------------E4B0C0D661F158E94844CB79--
--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com