[sanei_init_debug]: Setting debug level of artec to 13.
[artec] attach_one
[artec] Artec/Ultima backend version 0.3, last mod: 10/18/1998 22:45
[artec] http://www4.infi.net/~cpinkham/sane/sane-artec-doc.html
[artec] attach: opening /dev/sg0
[artec] attach: sending INQUIRY
[artec] attach: wait for scanner to come ready
[artec] wait_ready
[artec] scanner does NOT support read capability data function
[artec] attach: getting scanner capability data
[artec] Scanner capability info.
[artec] Vendor : ULTIMA
[artec] Model : AT6
[artec] Type : flatbed
[artec] Width : 8.50 inches
[artec] Height : 11.00 inches
[artec] X Range(mm) : 0-215
[artec] Y Range(mm) : 0-279
[artec] Horz. DPI : 50-300
[artec] Vert. DPI : 50-600
[artec] Contrast : 0-255
[artec] REQ Sh. Cal.: 1
[artec] REQ Ln. Offs: 1
[artec] REQ Ch. Shft: 1
[artec] SetWind Size: 55
[artec] Calib Method: 0
[artec] attach: found ULTIMA model AT6 version 1.01, x=0-14149222,
y=0-18310758, xres=50-300dpi, yres=50-600dpi
[artec] attach_one
[artec] Artec/Ultima backend version 0.3, last mod: 10/18/1998 22:45
[artec] http://www4.infi.net/~cpinkham/sane/sane-artec-doc.html
[artec] attach: opening /dev/scanner
[artec] attach: sending INQUIRY
[artec] attach: wait for scanner to come ready
[artec] wait_ready
[artec] scanner does NOT support read capability data function
[artec] attach: getting scanner capability data
[artec] Scanner capability info.
[artec] Vendor : ULTIMA
[artec] Model : AT6
[artec] Type : flatbed
[artec] Width : 8.50 inches
[artec] Height : 11.00 inches
[artec] X Range(mm) : 0-215
[artec] Y Range(mm) : 0-279
[artec] Horz. DPI : 50-300
[artec] Vert. DPI : 50-600
[artec] attach_one
[artec] Artec/Ultima backend version 0.3, last mod: 10/18/1998 22:45
[artec] http://www4.infi.net/~cpinkham/sane/sane-artec-doc.html
[artec] attach: opening /dev/scanner
[artec] attach: sending INQUIRY
[artec] attach: wait for scanner to come ready
[artec] wait_ready
[artec] scanner does NOT support read capability data function
[artec] attach: getting scanner capability data
[artec] Scanner capability info.
[artec] Vendor : ULTIMA
[artec] Model : AT6
[artec] Type : flatbed
[artec] Width : 8.50 inches
[artec] Height : 11.00 inches
[artec] X Range(mm) : 0-215
[artec] Y Range(mm) : 0-279
[artec] Horz. DPI : 50-300
[artec] Vert. DPI : 50-600
[artec] Contrast : 0-255
[artec] REQ Sh. Cal.: 1
[artec] REQ Ln. Offs: 1
[artec] REQ Ch. Shft: 1
[artec] SetWind Size: 55
[artec] Calib Method: 0
[artec] attach: found ULTIMA model AT6 version 1.01, x=0-14149222,
y=0-18310758, xres=50-300dpi, yres=50-600dpi
[artec] sane_get_devices
[artec] sane_open
[artec] init_options
[artec] sane_control_option 0, get value
[artec] sane_control_option 0, get value
[artec] sane_control_option 12, get value
[artec] sane_control_option 13, get value
[artec] sane_control_option 10, get value
[artec] sane_control_option 11, get value
[artec] sane_control_option 2, set value
[artec] sane_control_option 11, set value
[artec] sane_control_option 10, set value
[artec] sane_control_option 10, get value
[artec] sane_control_option 12, set value
[artec] sane_control_option 11, get value
[artec] sane_control_option 13, set value
[artec] sane_start
[artec] wait_ready
[artec] 197 pixels per line, 197 bytes, 197 lines high, xdpi = 100, ydpi = 100,
btr = 38809
[artec] artec_calibrate_white_shading
[artec] read_data
hope that helps
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com