> "Brian B." wrote:
>
> > BTW the lun switch is set to 3 on the back of my scanner. not sure if that
> > makes a difference.
>
> Well, that's a good hint - I actually don't mean any Red Heat
> progs.
>
> Now you have your Scanner set to ID 3
> If linux does not find it there it will not work.
> Might be after changing the ID you might want to
> power off the Scanner and the computer.
> After restarting both you should get "ID=3" for your scanner.
> Unless the actual settings of the scanner and what linux finds
> when reporting devices are identical, nothing will work.
Its detecting correctly
> When you boot your System the SCSI-Controller reports in most
> cases "PRESS CTRL-A (or press CTRL-B or press CTRL-S)" for
> configuration. That allows you to set some parameters for
> your Controller and the way it negotiates with attached devices.
Hmm seems my adaptec aha1520a doesnt have a way of accessing its bios. seems
odd since I know its bios is being loaded (?) as I get a message at boottime.
maybe the keypress is some thing other than what you said. Anyone else have
this card?
Regards
Brian
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com