Luca Del Signore wrote:
>
> Dear sirs,
> I am writing again for my at3.
> In fact, following your advice, i put an external pass-through 25 pin
> terminator on the second scsi plug on the back of my scanner, but
> NOTHING changes: everything freezes after the calibration phase. So i
> just lost 72.000 lire for this try. I would like to point out that:
> 1) I made sure that the scsi adaper was properly terminated, too;
> 2) On the SANE web site (http://www.mostang.com/sane) they say
> unequivocally that the software definitely works with artec at3 scanner
> (author's model!!! at least its what they say...).
> So why doesnt it work with my linux? Everything seems in order for what
> i can understand (but i am a pretty linux rookie) so could you please
> help me?? I am getting mad! Some other people says they work perfectly
> with the at3 under linux rh5.2 but dont understand why it doesnt work
> with me!!!!!
>
> Luca Del Signore
> Viale Manlio Gelsomini. 26
> Rome Italy 00153
Thats the mail i sent to artecusa without getting ANY help...Could you
help me??
I include the dmesg
--------------DF7AA44F944BC88CADD5DEC2
Content-Type: text/plain; charset=us-ascii;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
Linux version 2.2.2 (root@localhost.localdomain) (gcc version 2.7.2.3) #1 SMP dom apr 18 16:28:22 CEST 1999
mapped APIC to ffffe000 (00257000)
mapped IOAPIC to ffffd000 (00258000)
Detected 200455758 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 399.77 BogoMIPS
Memory: 127996k/131072k available (1040k kernel code, 420k reserved, 1568k data, 48k init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
per-CPU timeslice cutoff: 1.56 usecs.
CPU0: Intel Pentium MMX stepping 03
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xf04b0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport0: no IEEE-1284 device present.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL EL5.1A, ATA DISK drive
hdc: CDA106801ISE, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL EL5.1A, 4892MB w/418kB Cache, CHS=623/255/63, (U)DMA
hdc: ATAPI 10X CD-ROM drive, 120kB Cache
Uniform CDROM driver Revision: 2.52
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 2 hosts.
Vendor: ULTIMA Model: AT3 Rev: 1.90
Type: Scanner ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 5, lun 0
scsi : detected total.
PPP: version 2.3.3 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 48k freed
Adding Swap: 40124k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.13 detected OK (220)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
tty_io.c: process 269 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0
registered device ppp0
--------------DF7AA44F944BC88CADD5DEC2--
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com