failure with microtek scanmaker 600gs

Oliver Neukum (neukum@fachschaft.org.chemie.uni-muenchen.de)
Mon, 25 May 1998 20:25:55 +0200 (CEST)

Hello,
I have to report that sane 0.73 fails with my scanner mentioned in the
subject line.
Turning on debug gets:

[sanei_init_debug]: Setting debug level of microtek to 128.
[microtek] sane_init: MICROTEK says hello! (v0.4)
[microtek] sane_init: config- #Uncomment the following if you are tired of seeing the dump of the
[microtek] sane_init: config- # scanner INQUIRY every time the backend starts up...
[microtek] sane_init: config- #nodump
[microtek] sane_init: config- /dev/scanner
[microtek] attach_scanner: /dev/scanner
[microtek] attach_scanner: opening /dev/scanner
[sanei_init_debug]: Setting debug level of sanei_scsi to 128.
[microtek] attach_scanner: sending INQUIRY
[sanei_scsi] scsi_req_enter: entered 0x804dbd0
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804dbd0
[sanei_scsi] sanei_scsi.issue: 0x804dbd0
[sanei_scsi] sanei_scsi_req_wait: read 132 bytes
[microtek] id_microtek...
[microtek] id_microtek: not microtek: -1, -1, 200
[microtek] attach_scanner: device doesn't look like a Microtek scanner.[microtek] dump_suspect_inquiry...
========== Scanner Inquiry Block ==========
06 30 42 01 5b 16 00 00 4d 49 49 20 53 43 32 31
4d 53 46 33 30 30 5a 53 20 53 43 41 4e 4e 45 52
56 34 2e 32 53 43 53 49 20 46 2f 57 56 32 2e 31
20 43 54 4c 35 33 38 30 03 0f 8c c1 00 ee c8 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff

========== Scanner Inquiry Report ==========
===== Scanner ID...
Device Type Code: 0x06
Model Code: 0xc8
Vendor Name: 'MII SC21' Model Name: 'MSF300ZS SCANNER'
Firmware Rev: 'V4.2'
SCSI F/W version: 3.0 Scanner F/W version: 4.2
Response data format: 0x01

[microtek] sane_init: config-
[microtek] sane_open
[microtek] attach_scanner: /dev/scanner
[microtek] attach_scanner: opening /dev/scanner
[sanei_init_debug]: Setting debug level of sanei_scsi to 128.
[microtek] attach_scanner: sending INQUIRY
[sanei_scsi] scsi_req_enter: entered 0x804dbd0
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804dbd0
[sanei_scsi] sanei_scsi.issue: 0x804dbd0
[sanei_scsi] sanei_scsi_req_wait: read 132 bytes
[microtek] id_microtek...
[microtek] id_microtek: not microtek: -1, -1, 200
[microtek] attach_scanner: device doesn't look like a Microtek scanner.[microtek] dump_suspect_inquiry...
========== Scanner Inquiry Block ==========
06 30 42 01 5b 16 00 00 4d 49 49 20 53 43 32 31
4d 53 46 33 30 30 5a 53 20 53 43 41 4e 4e 45 52
56 34 2e 32 53 43 53 49 20 46 2f 57 56 32 2e 31
20 43 54 4c 35 33 38 30 03 0f 8c c1 00 ee c8 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff

========== Scanner Inquiry Report ==========
===== Scanner ID...
Device Type Code: 0x06
Model Code: 0xc8
Vendor Name: 'MII SC21' Model Name: 'MSF300ZS SCANNER'
Firmware Rev: 'V4.2'
SCSI F/W version: 3.0 Scanner F/W version: 4.2
Response data format: 0x01

scanimage: open of device microtek:/dev/scanner failed: Invalid argument
[microtek] sane_exit...
[microtek] sane_exit: MICROTEK says goodbye.

----------------

microtek2 fails also with:

scanimage: open of device microtek2:/dev/scanner failed: Invalid argument

regards

oliver neukum

--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com