Problem with Mustek 600 II CD (SP)

Georg Hüttenegger (georg@mondoshawan.ml.org)
Wed, 6 May 1998 10:16:10 +0200 (MEST)

I have a Mustek 600 II CD (same model as SP) recognized as MCF-06000CZ
with firmware rev. 2.03. I use an Adaptec 1505 scsi card for the scanner.
I have set the generic scsi buffer to the maximum value and use sane
version 0.72.
If I scan gray or lineart some lines are missing in the produced file
(because the scanner is not moving continously but in small steps, this is
hardly noticeable but what the scanner does).
Under WindowsNT with the Mustek driver software everything works fine
(also with the Adaptec), so it seems to be a problem with sane.

Georg Huettenegger TU-Vienna
georg@mondoshawan.unix.cslab.tuwien.ac.at

--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com