Im a Linux user (R.H 5.0 ) and I have a problem whith my mustek scanner.
The scaner is a Mustek Parangon 1200 SP iconecting to a Tekram DC-390
correctly supported by the kernel.
I use the GIMP, but, it try to scan, it scans, and wait a lot of time
(until scsi device resets ) until i can view the image
I let you a trace of the problem.
I have in /etc/profile the lines:
----------------------
export SANE_DEBUG_MUSTEK=3
export SANE_CONFIG_DIR=/etc/sane.d
---------
I use the gimp, and when I try to scan:
.
[mustek] attach: opening /dev/sga as scsi device
[mustek] attach: sending INQUIRY
[mustek] scsi_wait_ready: sending TEST_UNIT_READY
[mustek] attach: firmware revision 1.06
[mustek] attach: scanner has automatic line-distance correction
[mustek] attach: found Mustek scanner model MFS-12000SP (flatbed scanner), 1-pass
[mustek] sane_init: enabling linedistance-fix for /dev/sga
[mustek] sane_init: enabling lineart-fix for /dev/sga
.
.
[mustek] scsi_wait_ready: sending TEST_UNIT_READY
[mustek] line_distance: got factor=8, (r/g/b)=(0/2/4)
[mustek] line_distance: fixed up to factor=65535, (r/g/b)=(0/2/4)
[mustek] get_image_status: bytes_per_line=48, lines=241
[mustek] reader_process: limiting strip height to 1 inches (100 lines)
[mustek] lines_per_buffer=100, bytes_per_line=48
[mustek] read 4096 bytes
mustek] read -1 bytes
[mustek] read 4096 bytes
mustek] read -1 bytes
.
.
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read 1360 bytes
[mustek] read 0 bytes
it stops here, i must wait a lot of time when success this:
scsi : aborting command due to timeout : pid 102, scsi0, channel 0, id 5, lun 0 Start/Stop Unit 00 00 00 00 00
and then starts to scan
[mustek] scsi_wait_ready: sending TEST_UNIT_READY
[mustek] line_distance: got factor=8, (r/g/b)=(0/2/4)
[mustek] line_distance: fixed up to factor=65535, (r/g/b)=(0/2/4)
[mustek] get_image_status: bytes_per_line=1098, lines=619
[mustek] lines_per_buffer=29, bytes_per_line=1098
..
.
.
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 3822 bytes
[mustek] read -1 bytes
[mustek] read 0 bytes
and stops again.
Anyobody can help me?
Why dont return the image when it finish?
thanks
\ / clemente@teruel.org
x________\(O)/________x 2:346/207.49
o o O(.)O o o http://www.teruel.org/linux
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com