Hope this help.
Lele
---Platform: Linux 2.0.33 SCSI host: ASUS SC-200, Symbios Logic C810
rivendell:/# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: CANON Model: IX-03035B Rev: 2.01 Type: Scanner ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: PLEXTOR Model: CD-ROM PX-12TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: IOMEGA Model: ZIP 100 Rev: C.19 Type: Direct-Access ANSI SCSI revision: 02
-- General information: Chip NCR53C810a, device id 0x1, revision id 0x11 IO port address 0xe000, IRQ number 10 Using memory mapped IO at virtual address 0x6848000 Synchronous period factor 25, max commands per lun 4
-- rivendell:~/sane/sane-0.71# ./tools/find-scanner find-scanner: found scanner "CANON IX-03035B 2.01" at device /dev/scanner find-scanner: found scanner "CANON IX-03035B 2.01" at device /dev/sga-- rivendell:~/sane/sane-0.71# ./frontend/scanimage --help 2>tst[sanei_init_debug]: Setting debug level of dll to 128. [dll] adding backend canon [dll] loading backend canon [dll] load: found `/usr/local/lib/libsane-canon.la' [dll] dlopen()ing `/usr/local/lib/libsane-canon.so.0' [dll] init: initializing backend `canon' [sanei_init_debug]: Setting debug level of canon to 128. [canon] >> sane_init [canon] sane_init: sane 0.71 [canon] >> attach [canon] attach: opening /dev/scanner [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [canon] attach: sending (standard) INQUIRY [canon] >> inquiry [sanei_scsi] scsi_req_enter: entered 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ca98 [sanei_scsi] sanei_scsi.issue: 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: read 72 bytes [canon] << inquiry [canon] attach: sending TEST_UNIT_READY [canon] >> test_unit_ready [sanei_scsi] scsi_req_enter: entered 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ca98 [sanei_scsi] sanei_scsi.issue: 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [canon] << test_unit_ready [canon] attach: sending MEDIUM POSITION [canon] >> medium_psosition [sanei_scsi] scsi_req_enter: entered 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ca98 [sanei_scsi] sanei_scsi.issue: 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [canon] << medium_psosition [canon] attach: sending (extended) INQUIRY [canon] >> inquiry [sanei_scsi] scsi_req_enter: entered 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ca98 [sanei_scsi] sanei_scsi.issue: 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: read 110 bytes [canon] << inquiry [canon] attach: sending MODE SENSE [canon] >> mode_sense [sanei_scsi] scsi_req_enter: entered 0x804ca98 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ca98 [sanei_scsi] sanei_scsi.issue: 0x804ca98 ncr53c810a-0:2: ERROR (0:4) (9-0-0) (e0/33) @ script (eb8:1900000c). ncr53c810a-0: script cmd = 88080000 ncr53c810a-0: regdump: da 00 80 33 47 e0 02 1e 01 09 82 00 80 00 09 02. ncr53c810a-0: have to clear fifos. ncr53c810a-0: unexpected disconnect [sanei_scsi] sanei_scsi_req_wait: read 48 bytes [sanei_scsi] sanei_scsi_req_wait: SCSI command failed: Success [canon] << mode_sense [canon] attach: MODE_SENSE failed [canon] << sane_init [canon] >> sane_get_devices [canon] << sane_get_devices scanimage: no SANE devices found [dll] exiting [dll] calling backend `canon's exit function [canon] >> sane_exit [canon] << sane_exit
-------
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com